product review overlay image

Product Description

FloodMate 3 Emergency Pumping Kit.
 
FloodMate is an emergency pumping kit which has a powerful pump, a pack of FloodSax and discharge hoses for defending a property from flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm.   Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment, but keep other flood protection products e.g. Emergency Grab Bags, emergency meals etc.

Contents: 
1 x pump: WX10 Honda Driven.
1 x Phase 1 hose kit: 10 metres of 25mm (1”) non-kink pipe c/w quick release connectors.
For pumping near the property e,g. over window ledges, steps, walls, FloodSax,/Hydro Sacks, sandbags etc.

1 x Phase 2 hose kit: 10 metres of 25mm (1”) lay-flat pipe c/w quick release connectors.  
For pumping over flat surfaces e.g. over ground, away from the property.
1 x Floodsax Home pack:  1 door strip FloodSax and 4 medium FloodSax.
1 x Easy carry case: including a lid and 2 fastening straps with ABS clips.

FloodMate 3:  
1x WX10 Honda engine driven pump, with a 1.5HP engine and weighs 6.1kgs(dry). This is supplied with a quick release discharge connector, a 4 metre, quick release suction hose, and a low level suction tool. It will pump approximately 80 litres per minute across 30 metres of level ground with a 1 metre incline, when using 25mm (1”) hose. Initial priming of the pump with water is required before starting, It will pump water down to 3mm, but it must not run dry. For the full specification of this pump click here. Ideal for use when mains power is not
available.

Additional Information.

Product Code
FloodMate 3 Emergency Pumping Kit.

FloodMate 3 Emergency Pumping Kit.

Product Code FloodMate 3 Emergency Pumping Kit.